
                                                  v1.01

Notes for using the archive EPROLAN.EXE contained on the
Intel EtherExpress(TM) PRO/10 ISA adapter driver disk
========================================================
   Location of Archive:  \NWSERVER\311LAN\EPROLAN.EXE
   
   Contents of Archive:     EPRO.LAN (ODI 3.2 spec driver)
                            EPRO.LDI (Install file)
                            EPRO311.LAN (3.11 server driver)
                            NW311.TXT (NetWare 3.11 readme)
      

OVERVIEW
========

EPROLAN.EXE is a self-extracting archive that contains the
NetWare* Server ODI 3.2 spec drivers.  The EPRO311.LAN is 
designed specifically for NetWare 3.11 servers. The EPRO.LAN 
driver in this archive can be used on NetWare 3.12, 4.0x and 
4.10 if the server has not been updated to 3.3 spec NLMs.

The NetWare server driver contained on the directory
\NWSERVER in the Intel Configuration and Drivers diskette
follows the NetWare ODI 3.3 spec and should be used ONLY with 
updated 3.3 spec NLMs from Novell. 


INSTRUCTIONS
============

Copy the file EPROLAN.EXE to your local hard disk.  Change
directories to the location on your local hard disk where
you copied EPROLAN.EXE.  At the DOS prompt type:

eprolan <return>

The file will expand to include EPRO.LAN, EPRO.LDI, EPRO311.LAN
and NW311.TXT. Refer to the readme NW311.TXT to install the
driver.  If using this driver on 3.12 or 4.10, run README.EXE
on the Intel drivers disk, and view the instructions for that 
operating system.

   
* Third-party trademarks are the property of their respective owners.

