   OS/2 Warp 4.x Workstation
                                                                    v3.00


IBM OS/2* Warp 4.x Workstation Installation Notes for Intel's
EtherExpress(TM) PRO/10 ISA LAN Adapter
=============================================================

Location of Driver: \NDIS\EPRO.OS2


GENERAL INSTALLATION
--------------------

1  Install OS/2 Warp 4.0 using the "Easy Installation" option as
   instructed in the IBM installation guide.

2  In the Type of Activity window, select "Connect directly to LAN" and
   click NEXT.

3  In the File and Print Client window, select "Install File and Print
   Client" and click NEXT.

4  In the Specify Workstation Name window, enter a unique workstation
   name and description for your computer and click NEXT.

5  In the Domain Name window, enter in the name of your domain. If you do
   not have an existing domain name to use, use the default IBMPEERS and
   click NEXT.

6  In the Default User ID and Password window, specify your User ID and
   password. Click NEXT.

7  In the Novell NetWare Client for OS/2 window, select "Yes, install" if
   you are connecting to a Novell NetWare file server. Click NEXT.

8  In the TCP/IP Services window, select "Yes, install LAN and Modem
   support" if you need TCP/IP services. Click NEXT.
      
      Note: If you install TCP/IP services you will prompted for the
            following information: TCP/IP address, subnet mask, router IP
            address, domain name, host name, name server, and if network
            supports DHCP or DDNS.

9  In the Change Adapter window, click "Other Adapter".

10 When prompted for the driver in the Network Adapter Driver Diskette
   window, insert the EtherExpress PRO/10 ISA driver disk into drive A:
   and specify the path as A:\NDIS.

11 From the Driver Found window, select the "EtherExpress PRO/10 ISA
   Adapter", click on "Ethernet", and then click OK.  OS/2 Warp will then
   copy the driver and add it to the LAN adapter list.

12 From the Adapter Confirmation window, the "EtherExpress PRO/10 ISA
   Adapter" should be listed, click NEXT.

13 From the ISA Network Adapter Software Configuration window, select
   "No, hardware setting were not changed" and click NEXT.

14 From the Ready to Install window, click INSTALL.

15 Continue with the OS/2 Warp 4.0 installation as instructed in the IBM
   installation guide.





*  Third-party trademarks are the property of their respective owners.
