   Diskless and remote boot workstations
                                                                    v3.03

Installing an EtherExpress(TM) PRO/10+ adapter in a diskless remote boot
workstation
========================================================================

If you purchased a flash-equipped EtherExpress(TM) PRO/10+ adapter, the
Boot ROM is already installed.

If you don't have a flash-equipped adapter, you can order a boot ROM
upgrade kit (Intel product code FLASHUP) and install the Boot ROM
yourself.

Booting the workstation from a network server requires extensive work in
setting up the workstation and the server image files.  Refer to the
readme files on the Intel Configuration and Drivers disk and your NOS
documentation, which explain how to set up your workstation to remote
boot from the server.
