Tandy Professional Forum   Section: T1000/1400/3000/4K
Subject: Need Help   Total messages: 4
======================================

#62743   1 Reply   12/18/96   20:39:05
From: Smokey, 105510,751
To:   sysop

My Tandy 1500Hd can not find its HD any files or something that
could help, if so please W/B!!!!


#62749   Reply to #62743   12/20/96   20:18:14
From: Richard Bauer, 73206,2156
To:   Smokey, 105510,751

>> My Tandy 1500Hd can not find its HD any files or something
that could help, if so please W/B!!!! <<

Smokey,

I'm NOT the sysop or an expert but I saw your message and thought
I would jump in.  Are you getting a C:\> prompt?  Running DOS or
Windows?  Can you provide a little more information?

Richard Bauer


#62976   1 Reply   03/16/97   12:58:29
From: Richard Bauer, 73206,2156
To:   Charles  Peterson, 76275,1754

>>
Caught your comments regarding a model 1500HD (below), and just
had to ask:  Can these old pups REALLY run Windoze?  Mine has no
extended or expanded memory, but it does have a 20M HD. <<

Charles,

I was running Windows 3.1 on an old 386SX/12 with 2MB of ram.
Run is probably the incorrect verb...but it worked.  Not
well...but it worked.  I have upped to 4MB ram on my 4016SX...the
most I can put on the main board and it runs (there's that verb
again) better.  I am now shopping for a P-200.  I have seen
installations on laptops with not much memory but never one that
had less than 2MB.

Richard Bauer


#62982   Reply to #62976   03/17/97   23:58:19
From: Charles  Peterson, 76275,1754
To:   Richard Bauer, 73206,2156

03/17/97

Hi Richard,

<< I was running Windows 3.1 on an old 386SX/12 with 2MB of ram.
 Run is probably the incorrect verb...but it << worked.  Not
well...but it worked.

Thanks for the tip, it's appreciated,

Charles


