Tandy Professional Forum   Section: The Soapbox
Subject: DMP-430 on Windows???   Total messages: 3
==================================================

#62277   07/21/96   12:39:04
From: Robert  F. Runyan, 104217,3377
To:   Thomas Aubin, 76461,3131

Tom,
    I will get out my manual and get the dip switch settings and
E-mail you the settings.  Also will give you the drivers I used
in Windows to get it up an running.  If my memory serves me
correctly I used the generic text driver and also used the FX-850
driver.
    Will send more info later.

  BobR


#62285   1 Reply   07/22/96   21:56:16
From: Thomas Aubin, 76461,3131
To:   George A. Perales, 103364,1263

George,
Thanks, I'll check it out. Also I recieved E-Mail from another
person who saw my message containing dip switch settings and also
telling me to use the draft mode as well. Sounds like draft is
the way to go. I'll let you know how I make out.


#62286   Reply to #62285   07/22/96   22:13:07
From: George A. Perales, 103364,1263
To:   Thomas Aubin, 76461,3131

Thomas, if you're printing in DRAFT in DOS, your switch settings
are
already correct ...



