
                               INSTALLATION NOTES



        This application is supplied with its own Windows hosted
        installation procedure which you should run to install the
        software.

        You may run the installation procedure in one of two ways:


        1) From Windows 3.x Program Manager, select the File/Run menu
           option and enter the following command:

                 d:\SETUP

                 where d is the letter of your diskette drive


        2) From Windows 9x or Windows NT 4.0 or greater, click on
           'Start' and select the 'Run' option, then enter the
           following command:

                 d:\SETUP

                 where d is the letter of your diskette drive

        3) From Windows File Manager, click on your diskette drive
           icon and then double click on the SETUP.EXE file to run it.

        4) From Window 9x or NT Explorer, click on your diskette drive
           icon and then double click on the SETUP.EXE file to run it.


        In all cases, the install procedure will then initialise itself
        and display a 'Welcome' dialog followed by a request to enter the
        drive and directory on which you wish to install the software.
        The Setup procedure will automatically create the directory you
        specify and copy the necessary files into it.
        It is necessary to install some files in your \WINDOWS directory.
        The Setup procedure will install .INI and .PIF files in here.

        If you wish to de-install this software at any time, select the
        de-install icon. This will remove all files and directories
        relating to the application including those copied into your
        \WINDOWS directory (.INI files).
        Note that if you store any other files in the same directory as
        this application, the de-install will delete them, however, it
        will not remove sub-directories of the application's directory
        should you create any.


        If you have downloaded this software from a bulletin board such
        as Compuserve or the Internet it would have been compressed using
        PKZIP. You should use PKUNZIP to uncompress the .ZIP file onto a
        floppy diskette. In this way you will create yourself a ready-made
        install disk which you can use straight away to install the
        software automatically onto your hard disk and/or copy/distribute
        to other users.

        The HelpBuilder install diskette should contain the following
        files:

            ABOUT3.FRM
            ABOUT5.FRM
            AGREEMNT.TX_
            ALPHABET.BM_
            ARCHES.BM_
            ARROW.BMP
            BACK.BMP
            BGSTRIP.GIF
            BUTTON.BMP
            BUTTON1.BMP
            BUTTON2.BMP
            BUTTON3.BMP
            BUTTON4.BMP
            CLOSE.BMP
            COMMENTS.TXT
            CONTENT1.HBS
            CONTENTS.BMP
            CONTXT3.BAS
            CONTXT5.BAS
            COPYRITE.HBS
            CTL3DV2.DL_
            DEINST.EX_
            DIALOG1.HBS
            DIAMOND.BMP
            DISK01
            EMAIL.GIF
            ERROR1.HBS
            FILE_ID.DIZ
            GLOSARY1.HBS
            GLOSSARY.BM_
            GLOSSARY.SH_
            GLOSSARY.TO_
            GLOSSRY.BM_
            GLOSSRY.SH_
            GPPSOFT.HTM
            GPSOFT.GIF
            HCP.ER_
            HCP.EX_
            HELP.BAS
            HELP.H
            HELP.ICO
            HELPBLDR.EX_
            HELPBLDR.HL_
            HELPVB3.BAS
            HELPVB3.H
            HELPVB3.ICO
            HELPVB5.BAS
            HELPVB5.H
            HELPVB5.ICO
            HISTORY.BMP
            HOME.GIF
            INST16.EX_
            INSTALL.TXT
            LLADM16.EX_
            MAIN3.FRM
            MAIN5.FRM
            MSBUTTON.BMP
            NEXT.BMP
            ORDERAUS.WRI
            ORDERUK.WRI
            PREVIOUS.BMP
            PRINT.BMP
            QUESTION.BMP
            QUESTION.ICO
            README.TXT
            REDGRN.SHG
            ROUNDPT.BMP
            SAMPLE1.HL_
            SAMPLE1.HPJ
            SAMPLE1.PRJ
            SAMPLE1.TO_
            SEARCH.BMP
            SEEALSO.BMP
            SEGGRAPH.SHG
            SETUP.BMP
            SETUP.DAT
            SETUP.EXE
            SETUP.SBS
            SPELLCHK.DL_
            SPELLCHK.HL_
            SQUAREPT.BMP
            TS.HL_
            UK.DI_
            VB3.HL_
            VB3.HPJ
            VB3.MAK
            VB3.PRJ
            VB3.TOP
            VB5.HL_
            VB5.HPJ
            VB5.PRJ
            VB5.TOP
            VB5.VBP
            VB5.VBW
            WIN31.PIF
            WIN35.PIF
            WIN40.PIF
            WIN95.PIF
            WIN98.PIF
            WINDOWS.PIF
            WINNT.PIF
            WINNT35.PIF
            WINNT40.PIF

        If you require any further information, please see the
        HelpBuilder help file 'Contacting GPP Software' section for
        information on how to contact GPP Software.

