

    NOTES


    o   This version of Pegasus was tested under OS/2 versions 2.0 with
        service pack 1 and service pack 2 applied and with OS/2 version 2.1.

    o   In the event of a system trap, you should obtain fixes for the
        OS/2 2.0 SP 2 kernal or OS/2 2.1 kernal : APAR PJ09893

    o   OS/2, SPM/2, LAN Netview Manager are copyright of IBM Corporation.

    o   Netware is copyright of Novell.







    INTRODUCTION



                            Pegasus Resource Monitor
                                   Version 1.0

                       Copyright (c) 1993 C.O.L. Systems Inc.
                               All Rights Reserved

    Pegasus ( The Greek Myth ) A winged horse that with a stroke
    of his hoof caused the fountain Hippocrene to spring forth
    from Mount Helicon.

    Pegasus Resource Monitor ( The OS/2 Product ) A 32 bit application
    that with a click of a mouse causes a fountain of performance statistics
    to spring forth from Mount OS/2 2.x!

    Pegasus for OS/2 2.x is a kernal level, real-time, Presentation
    Manager monitoring tool for system and application resource
    usage.

    It features:

    o   An SAA/CUA compatible interface.

    o   Online hypertext help.

    o   System Activity Display

         o  Cpu, Irq, both percent busy and service counts
         o  Page In, Page Out
         o  Memory

    o   Input Output Activity Display

         o  By disk parition.
         o  By printer.
         o  By RS232 port.

    o   Application Activity Display

         o  Per process, Cpu, dispatch, page faults, I/O

    o   Configuration options for setting application refresh and
        system update time.

    o   Configuration options for setting auto-start of the various
        activity displays.

    Pegasus is distributed as Shareware.  This means that users are
    encouraged, subject to restrictions described in the License Agreement,
    to share copies of this program with friends, associates and bulletin
    boards.  Please remember that if you use this software you are required
    to pay the registration fee of $39.95 as described in the License
    Agreement.







    COPYRIGHT/LICENSE/WARRANTY


    Pegasus Copyright (c) 1993 by C.O.L. Systems Inc. - All rights reserved.

    License Agreement and Warranty Disclaimer

    You should carefully read the following terms and conditions before
    using this software.  Use of this software indicates your acceptance of
    these terms and conditions.  If you do not agree with them, do not use
    the software.

    Shareware Version

    You are hereby licensed to:  use the Shareware Version of the software
    for a 21 day evaluation period; make as many copies of the Shareware
    version of this software and documentation as you wish; give exact
    copies of the original Shareware version to anyone; and distribute the
    Shareware version of the software and documentation in its unmodified
    form via electronic means.  There is no charge for any of the above.

    You are specifically prohibited from charging, or requesting donations,
    for any such copies, however made; and from distributing the software
    and/or documentation with other products (commercial or otherwise)
    without prior written permission.

    Unregistered use of Pegasus after the 21-day evaluation period is in
    violation of federal copyright laws.

    Evaluation and Registration

    This is not free software.  This license allows you to use this software
    for evaluation purposes without charge for a period of 21 days.  If you
    use this software after the 21 day evaluation period a registration fee
    of $39.95 is required.

    Payments must be in US dollars drawn on a US bank, and should be sent to
    C.O.L. Systems Inc.  8 Overlook Way, Purdys, NY 10578. Quantity
    discounts are available, as described in the file ORDER.DOC.

    One registered copy of Pegasus may be dedicated to a single person who
    uses the software on one or more computers or to a single workstation
    used by multiple people.

    You may access the registered version of Pegasus through a network,
    provided that you have obtained individual license for the software
    covering all workstations that will access the software through the
    network.





    Governing Law

    This agreement shall be governed by the laws of the State of
    New York.

    Disclaimer of Warrantee

    This software and the accompanying files are sold "as is" and without
    warranties as to performance of merchantability or any other warranties
    whether expressed or implied.  Because of the various hardware and
    software environments into which this program may be put, no warranty of
    fitness for a particular purpose is offered.

    Good data processing procedure dictates that any program be thoroughly
    tested with non-critical data before relying on it.  The user must
    assume the entire risk of using the program.  Any liability of the
    seller will be limited exclusively to product replacement or refund of
    purchase price.







    REGISTERED USERS

    Once registered you will have access to additional Pegasus Tools at
    no charge ( a $19.95 saving ) when available. These tools will include:

      o  Cache Monitor - Monitor FAT and HPFS cache activity

      o  Application Analyzer - Fully analyze thread and file activity
         for a single process.

      o  IO Monitor - Monitor every file opened, read from or written
         to.

    Pegasus Tools will run as stand alone intensive trace utilities as
    they themselves are resource intensive.

    Registered users will be supported on the C.O.L. Systems Inc.
    technical support BBS. (see SUPPORT AND QUESTIONS ).

    In addition, you are entitled to all updates, changes, fixes, and
    enhancements to the Pegasus Resouce Monitor.



    SUPPORT AND QUESTIONS

    Technical support is available at no charge to registered users. To gain
    support, dial into our technical support BBS at:

         (914) 277-5863 (N-8-1) 2400 - 14400.

    If you have sent in the registration fee and log on for the first time,
    leave a message to the sysop and include your check or money order 
    number. Once we have received your registration fee we will upgrade
    your user authority to access the Pegasus File and Message areas.






    INSTALLATION


    System Requirements:

    o   OS/2 version 2.0 SP 1 or later.

    Pegasus-related files are:

    o   PEGASUS.TXT  this file.
    o   ORDER.DOC    order form
    o   Pegasus.EXE  executable
    o   Pegasus.HLP  online help
    o   Osrm2Dcf.EXE Data Collector Management
    o   Os2Dcf.Exe   Data Collector

    o   DcfApi.Dll   Data Collector interface
    o   Os2Com.Dll   Common Collector Functions
    o   Rm2Comm.Dll  Communications class library
    o   Rm2DefsB.Dll Common Collector Management Functions
    

    Installation:

    There are two parts to the installation process.  The first is performed
    manually before running Pegasus. The second part is run from the Setting
    dialog. This dialog box is displayed the first time Pegasus is run, and
    can be rerun from the Configuration pull-down menu.

    One time installation procedure:

    1) If you already have installed a previous version of Pegasus, delete all
    files in your Pegasus directory.  Otherwise create a directory to hold the
    Pegasus related files.  For example, "C:\Pegasus".

    2) Copy all Pegasus-related files to this directory. 
       Note: there is no need to include the directory containing Pegasus 
       related files in your LIBPATH= or HELP= paths if you set up a program
       object that uses the installed directory as the working directory.

    3) Run Pegasus.EXE, either by double clicking on Pegasus.EXE as a
       program object or by entering START Pegasus at the the OS/2 system 
       prompt.  The first time you run Pegasus it will bring up the Settings
       dialog box to complete the installation.  

    Optional steps:

    a) Add the directory created in step one to your PATH.  If you don't add
    the directory to your path, you'll need to type the directory name when
    you start Pegasus from the command line (for example, you'll have to type
    "C:\Pegasus\Pegasus" rather than just "Pegasus"). You will also need
    to add the directory to your LIBPATH= and HELP=





    ERROR HANDLING


    Pegasus creates a log file called DCF.LOG in the Pegasus directory, or
    where the process is run from. In the event of any errors or invalid
    measurements, this file may be usefull in resolution. 

    If you do experience errors and the file is preserved, please upload
    it to the technical support bbs.






    FUTURE ENHANCEMENTS


    Ideas for future enhancements include:

    o   Printing
    o   LAN Req. monitoring
    o   HPFS386 monitoring.
    o   Support for IBM SPM/2 2.x collector.
    o   Support for IBM LAN Netview Monitor Agent.

    Additional suggestions are welcome!


   NETWORK MANAGERS

   If you like Pegasus, you may like information on our Heterogenous
   Performance and Capacity Management System for Networks:

      Osrm2 Version 2.0.

   This product includes:

      Support for centrally collecting measurements from:

            OS/2 1.x
            OS/2 2.x
            Novell Netware ( in development )

      Post processing report and graph generation

      Centrallized viewing console ( OS/2 2.x PM application )

      And much more!


   If you are interested, download RM220.ZIP from our technical
   support BBS.


