
                          Additional Information

                         Sound FX Plus Version 2.11


   This file contains additional information and changes about the
   various software that was not available at printing time.


   Setup Environment
   =================

   Please take note that environment string required in the AUTOEXEC.BAT
   file has been automatically setup during Software installation
   process and the "SETUP ENVIRONMENT" Selection in Sound FX PLUS
   Diagnostics program (SG2.EXE) has been removed. User must use
   Configuration Program (SGFIG.EXE) to set up the enviroment string in
   the AUTOEXEC.BAT file if there is a change in the hardware settings
   (I/O base address, interrupt or DMA channel) of the Sound FX PLUS
   card.
   
   Notes About Using EMM386.EXE
   ============================

   When running applications with EMM386.EXE installed, the following
   error message may appear:

      "EMM386 DMA buffer is too small"

   You can overcome this problem in two ways:

      - remove the EMM386.EXE entry from the CONFIG.SYS file

      OR

      - add the following parameter to the EMM386.EXE entry in the
        CONFIG.SYS file:

           D=64

           where D specifies how many kilobytes of memory should be
           reserved for buffered Direct Memory Access (DMA).

        An example of this may be:

           C:\WINDOWS\EMM386.EXE D=64


                             --- End of File ---

