
               Microsoft Windows '95 Installation Instruction
                                      
     (For Sound Galaxy Waverider 32+ Family Cards(For FCCID:I38-MMSN826
                                   Only))
   Note : If you have previously installed the Sound Card in Windows 3.x
   environment, and have upgraded to Windows '95, please follow step #1.
    Otherwise, proceed to step #3 to configure the Sound Card in Windows
                             '95 environment. 
                                      
   1. Restart your computer in MS-DOS mode. Follow the steps described
   below :
   If your computer is power-off,
       - Power-on your system, and press F8 immediately after 'Starting
       Windows 95 ...' message is shown.
       - From the selection, choose 'MS-DOS prompt only'.
       If your computer is already at Windows '95 desktop,
       - Click the Start button on the taskbar and select Shutdown from
       the menu.
       - Click on Restart the Computer in MS-DOS mode.
       
   2. Remove the statements shown below (in bold) from your Windows
   SYSTEM.INI file. Note that the SYSTEM.INI file can be found in your
   Windows '95 directory.
   [386 Enhanced]
       .
       device=vsglx16.386 
       [drivers]
       .
       wave=mm16w.drv
       aux=mm16w.drv
       midi=mm16w.drv
       mixer=mm16w.drv
       midi1=mmopl3.drv
       
   3. To ensure Sound Blaster compatibility under Windows '95 DOS mode,
   check and ensure that the following statements are in your
   AUTOEXEC.BAT file.
   SET BLASTER = A220 I5 D1 T4
       SET SOUND = C:\{path}
       where,
       A220 defines the I/O address of the sound card (default is 220H)
       I5 defines the IRQ Channel of the sound card (default is IRQ 5)
       D1 defines the DMA Channel of the sound card (default is DMA 1)
       path defines the path to your Sound Card directory
       
   4. Restart your computer by pressing <CTRL>+<ALT>+<DEL>, to start-up
   Windows '95 in desktop mode.
   
   Before you proceed to step#5, please ensure that you have downloaded
   the files [1]2316FD95.ZIP and [2]WT-102.ZIP from our FTP or Aztech
   BBS. Unzipped the files and copy the files to a blank diskette labeled
   'Sound Galaxy Waverider 32P Windows '95 Driver' and 'Sound Galaxy
   WaveTide Driver version 1.02'.
   
   5. To configure the Sound Card device in Windows '95, follow the steps
   described below :
   - Click the Start button on the taskbar and drag the mouse cursor to
       highlight Setting then Control Panel from the menu.
       - At the Control Panel Window, double-click the Add New Hardware
       icon.
       - From the Add New Hardware Wizard dialog box, click the Next
       button.
       - When prompted whether to you want Windows to search for new
       hardware, choose No and click the Next button.
       - When prompted to choose the type of hardware you want to
       install, move the scroll bar downwards. Highlight "Sound, video
       and game Controllers" and click the Next button.
       - When prompted to choose the manufacturer and model of your
       hardware, click the Have Disk button.
       - An Install from Disk dialogue box will appear. Insert the disk
       labeled 'Sound Galaxy Waverider 32P Windows '95 Driver' disk into
       A: drive, and click the OK button.
       - When prompted whether to install using default settings, click
       on the Next button.
       - When prompted that the installation has been completed. Click on
       the Finish button to complete and exit installation.
       At this point, the Sound Card device has been properly configured
       and Windows will prompt a System Settings Change dialog box to
       shutdown your computer and re-initialize the hardware.
       - Choose Yes to restart Windows '95 and initialize the Sound Card
       device, or
       - Choose No and proceed to step #6, if you want to configure a
       Joystick device.
       
   6. To configure the Joystick device in Windows '95, follow the steps
   described below :
   - At the Control Panel Window, double-click the Add New Hardware icon.
       - From the Add New Hardware Wizard dialog box, click the Next
       button.
       - When prompted whether to you want Windows to search for new
       hardware, choose No and click the Next button.
       - When prompted to choose the type of hardware you want to
       install, move the scroll bar downwards. Highlight "Sound, video
       and game Controllers" and click the Next button.
       - When prompted to choose the manufacturer and model of your
       hardware, click on Microsoft and choose Gameport Joystick. After
       this, click on the Next button.
       - When prompted whether to install using default settings, click
       on the Next button.
       - When prompted that the installation has been completed. Click on
       the Finish button to complete and exit installation.
       At this point, the Joystick device has been properly configured
       and Windows will prompt a System Settings Change dialog box to
       shutdown your computer and re- initialize the hardware.
       - Choose Yes to restart Windows '95 and initialize the Joystick
       device, or
       - Choose No and proceed to step #7, if you want to the Wavetable
       Synthesizer device.
       
   7. Configure WaveTide Wavetable Synthesizer device in Windows '95
   following the steps described below :
   - Insert the disk labeled 'Sound Galaxy WaveTide Driver version 1.02'
       into A: drive.
       - At Windows '95 desktop, click the Start button on the taskbar
       and drag the mouse cursor to highlight Run from the menu.
       - From the Run dialog box, specify A:\setup.exe. This will
       automatically install and configure the WaveTide Wavetable
       synthesizer in Windows '95.
       - After completion, choose Yes when it will prompts you to
       re-start Windows for the driver to take effect.
       
   8. Modify the MIDI configuration of this MPU-401 compatible device
   following steps described below :
   - At Windows '95 desktop, click the Start button on the taskbar and
       drag the mouse cursor to highlight Setting then Control Panel from
       the menu.
       - At the Control Panel Window, double-click the Multimedia icon.
       - From the Multimedia Properties menu, click on the Custom
       Configuration radio button and then choose Configuration.
       - From the MIDI Configuration dialog box, highlight Channels 1 to
       16 and click on the Change button.
       - From the Change MIDI Instrument dialog box, choose WaveTide
       Wavetable Synthesizer by clicking the down-arrow on the MIDI
       Instrument field.
       - From the Multimedia Properties menu, click on the Apply button
       then on the OK button.
       At this point, the Wavetable Synthesizer device has been properly
       configured.
       
   The steps described above completes the Sound Card Installation or
   Configuration in Windows '95 environment. If you encounter any
   conflict after installation, please refer to the 'Troubleshooting'
   section in Microsoft Windows '95 for further details.

References

   1. ftp://ftp.aztech.com.sg/pub/sg/wrider/2316fd95.zip
   2. ftp://ftp.aztech.com.sg/pub/sg/wrider/wt-102.zip
