TNTClk version 1.2
Written by Chris Groenveld

****************************** WARNING ******************************
THIS PROGRAM ALLOWS YOU TO ALTER THE CLOCK SETTINGS OF YOUR VIDEO CARD.
IMPROPER USE OF THIS PROGRAM MAY CAUSE DAMAGE TO YOUR COMPUTER AND OR
VIDEO CARD. I AM NOT RESPONSIBLE FOR ANY DAMAGE CAUSED BY THIS PROGRAM.
*********************************************************************


Overclocking
------------

This program allows you to modify the clock settings of any RIVA TNT
based board. It should also work on any TNT2.
You can adjust the core and memory clock WITHOUT having to reboot your
system.
Use this program at your own risk. Test your settings thoroughly before
you change them further. And don't take steps of 10 MHz at a time.


Apply settings on startup
-------------------------

If you check the "Apply on startup" box, the selected settings will be applied
every time you start your computer. This is done by placing an TNTClk entry in
the registry (in "HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Run").
Test the selected settings first, before you check this box!


Advanced clock settings
-----------------------

If you want to be in full control of your TNT, you can manually select
the frequencies of the core and memory. Note that i limited the clock speeds
a bit, so you can't set an insane value of 1 GHz.

	TNT		TNT2
core	80-125		100-200
memory	100-150		100-250


Memory timings
--------------

This allows you to modify the timings of your video memory (CAS latency, wait
states, etc). Experimenting with these values may cause your computer to hang.
These settings aren't applied until you push the Apply button!
The default values of my LeadTek S320 RIVA TNT are from top to bottom:
0, 3, 1, 0, 1, 2, 1, 3, 2
