* SVGA Drivers for STB Video Board (250-4056)

The Super VGA Drivers enable the user to run Windows 3.0 and 3.1 
under the video controller's Super VGA screen modes on computers 
in which the STB Video Board has been installed. 

This disk contains the following files--

   OEMSETUP.INF  SETUP30.INF   OEM480.INF    W3480.DRV
   W3600.DRV     W3768.DRV     W3I768.DRV    W31024.DRV
   W3I1024.DRV   VDD31.386     VDD30.386     VGACOLOR.GR2
   8514.GR3      VGACOLOR.2GR  VGADIB.3GR    8514FIX.FON
   8514OEM.FON   8514SYS.FON   COURF.FON     HELVF.FON
   SERIFF.FON    SMALLF.FON    SSERIFF.FON   SYMBOLF.FON
   TMSRF.FON     README.DOC    README.TXT
   
   
In order to obtain a printout of this README.TXT file, insert this
disk in Drive A, make sure the printer is switched on, is on line,
and at the C:\> prompt, enter the following command--

   PRINT A:README.TXT

and press <Enter>.


The installation instructions for the Super VGA Drivers are included
in the README.DOC file. In order to obtain a printout of this README.DOC 
file, insert this disk in Drive A, make sure your printer is switched 
on, is on line, and at the C:\> prompt, type the following command--

   PRINT A:README.DOC

and press <Enter>.



NOTE:
"While reasonable efforts have been taken in the preparation of this
information to assure its accuracy, Tandy Corporation/Radio Shack
assumes no liability resulting from the use of the information
contained herein."
