* Sound Drivers for 3100 - 2 OF 2

*** Requires High Density Disk ***

These drivers enable the user to access the Sound Blaster Card.

NOTE:
   * This drivers disk is DISK TWO of a two disk set. Make sure that
     drivers from DISK ONE are installed (as per the installation
     instructions in the README.DOC file on DISK ONE) before the
     installation from this disk is started.

This disk contains the following files--

   DISK.ID
   INSTALL.002
   README.TXT

In order to obtain a printout of this README.TXT file, insert this
disk in Drive A, make sure your printer is switched on, is on line,
and at the C:\> prompt, type the following command--

   PRINT A:README.TXT

and press <Enter>.

The installation instructions and other information regarding these 
drivers are included in the README.DOC file on DISK ONE. In order to
print the README.DOC file, insert DISK ONE in Drive A. At the C:\>
prompt, type in the following--

   PRINT A:README.DOC

and press <Enter>. The README.DOC is approximately four pages long.


NOTE:
"While reasonable efforts have been taken in the preparation of this
information to assure its accuracy, Tandy Corporation/Radio Shack
assumes no liability resulting from the use of the information
contained herein."

