                             PRINT OPTIONS MENU
                             ==================

        The PRINT OPTIONS MENU contains all of the settings used to control
 how  an  average  sheet  will  appear  when  printed.  By changing various
 settings, a fully customized printout  may be generated. The settings that
 produced this customized printout may then  saved to disk and recalled for
 use at a later date.

        Along side  of each option is  the initial default setting  that is
 defined in "Options/Defaults". The initial values were saved to disk along
 with the  Team and Bowler databases  when the league was  first defined in
 Setup.  Any changes  made in   "Options/Defaults" (  2) Printout)  will be
 reflected here.


                           Print Average Sheets

                     ͻ
                           PRINT OPTIONS MENU       
                     ͹
                      Print League Name       Y    
                      Print by Division       N    
                      Round Averages          N    
                      Number of AVERAGES      *    
                      Enhanced AVERAGES       N    
                      Print SPARES            Y    
                      Number of HIGH SERIES   3    
                      Number of HIGH SINGLES  3    
                      Number of HIGH NO MARKS 3    
                      Number of USER DEFINED  2    
                      Print CLUB Scores       Y    
                      Print TEAM STANDINGS    Y    
                      Enhanced TEAM STANDINGS N    
                      Eject PAGE When Done    N    
                     ͼ


        Left unchanged,  BowlStat will print a  "standard" average sheet as
 determined by the order of the  menu selections in the PRINT OPTIONS MENU.
 The number  of bowler names printed  for each award are  determined by the
 values assigned to each option. This standard sheet consists of:

        o League Name
        o Bowler Averages
        o Bowler HIGH SERIES
        o Bowler HIGH SINGLES
        o Bowler HIGH NO MARKS
        o Bowler USER DEFINED
        o Team Standings

 Print League Name (default "Y")
 -----------------

        A setting of "Y" will cause  the current League Name to be printed,
 boardered  with "*"'s  both above  and below.  Also, the  current date (in
 MM-DD-YYYY format), will be printed in  the upper right hand corner of the
 page. This option  is internally set to "Y" for  database dumps and cannot
 be changed.


 Print by Division (default "N")
 -----------------

        Change  this  option  to  "Y"  to  group  Averges,  Awards and Team
 Standings by Division. Immediately to the  right of the header will appear
 the name for the division currently being printed. The default option will
 print all bowler names together, regardless of what division they are in.


 Round Averages (default "N")
 --------------

        Change this option to "Y" to  print averages rounded to the nearest
 10th of  a pin. For example,  120.578 would be printed  as 120.6, with the
 default setting, it would be printed as 120.5


 Number of AVERAGES (default "*" = all)
 ------------------

        This option specifies  the maximun number of bowler  names to print
 when printing averages. The default is  "*"- all bowlers. To omit averages
 from the printout, enter a value of 0.

        BowlStat  divides the  average sheet  into two  halves (a  left and
 right). LADIES averages will be printed in the left half and MENS averages
 will appear  in the right  (ladies before gentlemen).  If the league  is a
 "Mens or Ladies only" league, BowlStat will print the averages in the left
 column only.


 Enhanced AVERAGES (default "N")
 -----------------

        Normally,  the  average  award  consists  of  the  bowlers name and
 average. The  printout may be enhanced  by changing the default  option to
 "Y". Along  with the bowlers name  and average, the current  total pinfall
 and the number of strings bowled will also appear.

        To make room for the enhanced information, BowlStat will print only
 the initial of the bowlers first name. With the option at default, as much
 of  the  first  name  will  be  printed,  determined  by  existing  column
 limitations.

        NORMAL:     Stone, Kevin                172.8
        ENHANCED:   Stone, K.      3456   20    172.8


 Print SPARES (default "Y")
 ------------

        To  omit "Spare"  bowlers from  ALL printouts,  change the  default
 option to "N". All sheets printed will contain only regular bowlers.


 Number of HIGH SERIES (default "3")
 ---------------------

        Enter the  number of bowler  names to print  for the "HIGH  SERIES"
 award. To omit this award from the prinout, enter a value of 0.


 Number of HIGH SINGLES (default "3")
 ----------------------

        Enter the  number of bowler  names to print  for the "HIGH  SINGLE"
 individual award. To  omit this award form the printout,  enter a value of
 0.


 Number of HI NO MARKS (default "3")
 ---------------------

        The HIGH NO MARK award is used in the Candlepin Bowling game. It is
 the string score of a bowler who has fail to either bowl a strike or spare
 and indicates how well a bowler has "pinned".

        Enter the  number of bowler names  to print for the  "HIGH NO MARK"
 individual award. To  omit this award form the printout,  enter a value of
 0.


 Number of USER DEFINED (default "2")
 ----------------------

        The USER DEFINED award is an  indipendant award set by the user and
 is defined in "Options/Defaults". If not changed, it defaults to "BOWLER -
 69's" - a Candlepin award which  represents the number of strings in which
 a  bowler has scored a vaule of 69  in one of the frames bowled. For every
 one bowled, the bowler contributes a sum  of money (usually $.25) to a pot
 and the  bowler with the highest  total at the end  of the season receives
 all of the money collected.

        Enter  the number  of bowler  names to  print for  the USER DEFINED
 individual award. To  omit this award form the printout,  enter a value of
 0.


 Print CLUB SCORES (default "Y")
 -----------------

        BowlStat  will print  all bowler  names and  scores for  anyone who
 meets the minimum club requirements, as defined in "Options/Defaults". The
 club can be either an individual string or high series. If CLUB SCORES are
 not to be printed, change the default option to "N".


 SINGLE CLUB:

        DATE            NAME                    1    2    3    TOTAL
        ----            ----                   ---------------------
        03-07-1991      Kevin Stone                 198


 SERIES CLUB:

        DATE            NAME                    1    2    3    TOTAL
        ----            ----                   ---------------------
        03-07-1991      Kevin Stone            201  183  196     580


        BowlStat retrieves the Club Scores from the Yearly Statistics file.
 Because the file  becomes larger as more Yearly  Statistics are added, the
 printout speed  will decrease over time.  This is normal and  should be no
 cause for concern.

 Print TEAM STANDINGS (default "Y")
 --------------------

        This option turns on/off the  printing of team standings. Standings
 will appear  in the order of  points WON, from highest  to lowest. If Team
 Standings are not required, change the default option to "N".


 Enhanced TEAM STANDINGS (default = "N")
 -----------------------

        If Team Standings are to be printed, they can be enhanced with this
 option. Along with the normal output  of Team Name, Point Won, Points Lost
 and Total Points,  BowlStat will include Total Pinfall,  High Single, High
 Series and the percentage of wins vs losses.

 NORMAL:

                                    POINTS
                  TEAM NAME    WON   LOST  TOTAL
                  ---------   ------------------
                  Kingpins      32     12     44


 ENHANCED:

               TOTAL          POINTS                      HIGH
  TEAM NAME   PINFALL    WON   LOST  TOTAL   % AVG.  SINGLE  SERIES
  ---------   -------   ------------------   ------  --------------
  Kingpins      1234      32     12     44     87.5     643    1343


 Eject PAGE When Done (deafult = "Y")
 --------------------

        This option is valid only if the avearage sheet is to be printed on
 a printer, as selected by the OUTPUT  MENU. By changing the default option
 to  "N", the  printer will  NOT go  to the  top of  the next page when the
 printing  of  the  average  sheet   has  been  completed.  The  option  is
 automatically set  to "N" when the  output device is either  the SCREEN or
 DISK DRIVE.

        This  option also  allows average  sheets to  be customized  to any
 requirements. By changing the default option  to "N", an average sheet may
 be "built" in any order by  overlaying sheets created with different print
 options.  For example,  to print   Team Standings  first then  followed by
 bowler averages and individual awards:

        o Select sheet BY AVERAGE and output to PRINTER.

          1) Enter "Y" or "N" to Print League Name option.
          2) Enter 0 to the Number of AVERAGES option. (No Averages)
          3) Enter 0 to the Number of HIGH SERIES, Number of HIGH SINGLES,
             Number of HIGH NO MARKS and Number of SIXTY NINES.
          4) Enter "Y" to the Print TEAM STANDINGS option.
          5) Enter "N" to the Eject PAGE When Done option.

          Print the  average sheet by  exiting the Print  Options Menu with
 the ESC (escape) key.

         Since the  Eject PAGE When  Done option prevents  the printer from
 performing a form feed to the next sheet, anything now printed will appear
 after the Team Standings. To conclude this example:

          1) Enter "N" for the PRINT LEAGUE NAME option.
          2) Enter the required value to the Number of AVERAGES,
             Number of HIGH SERIES, Number of HIGH SINGLES,
             Number of HIGH NO MARKS and Number of SIXTY NINES options.
          3) Enter "N" to the Print TEAM STANDINGS option.

          Print the remainder  of the average sheet. The  result will be an
 average sheet in the following order:

     1) League Name.
     2) Team Standings.
     3) Averages.
     4) Individual Awards.

        By  varying the  "Y"/"N" and  number entries  to the  various print
 options,  BowlStat can  build a   printout to  any requirements.  Once the
 desired format has  been obtained, the individual options  can be saved to
 disk as a set and loaded back in  to speed up the printing process. In the
 above example,  the two separate sets  of print options could  be saved to
 disk under  the filenames of PART1  and PART2. Then, to  print the average
 sheet, the settings can be loaded back into BowlStat.

        Once  the ESC  (escape) key  has  been  pressed to  exit the  Print
 Options Menu, BowlStat  will ask if the print  options currently in effect
 should  be  saved  to  disk.  If  they  are,  enter  "Y"  to the following
 confimation prompt: "Save Print Format? (Y/N):". Enter a filename (maximum
 length of 8 characters) in which to store the print options.

 NOTES: Average  sheet building is  also possible to  the DISK DRIVE.  When
        prompted for a name to save the average sheet under, enter the same
        name as a  previously printed average sheet. BowlStat  will ask the
        following confirmation: "SHEET EXISTS! OK to APPEND to it? (Y/N):".
        Enter  "Y" and  press the  "Enter" or  "Return" key.  The sheet, as
        defined by the current print options,  will be appended to the file
        currently on the disk drive.

        The  order  of  a  bowler's  name  is defined in "Options/Defaults"
        (General).  The default is LAST,  FIRST but can be changed to FIRST
        LAST depending on your preference.


